Composition
Features
Module
Rodless Cylinder
Main Component
- Rodless Cylinder
- Proximity Sensor
- 5/2-way (All block) double solenoid valve
- Cylinder speed controller (flow control valve)
Rodless cylinder
worth about 1.5m
long was used, and the
handling station is a
process that connects processing to
conveyor process.
In case of defective in the middle of process, the faulty units should be discarded at extraction slider and is moved to its initial position.
Gripper
Main Component
Cylinder-mounted proximity sensor
Cylinder-mounted proximity sensor
Speed controller (flow
control valve)
Gripper module is used to clamp workpieces. Here, the gripper
module will clamp the workpiece on the indexing table and to unclamp conveyor station.
Slider
Main Component
Slider of profile structure
Guide cover
Column
Multi-base
If the workpiece which is transferred from previous process
is defective, it is extracted in the
middle of handling process. Also,
there is a sensor at
the
top of the slider to alarm,
if
the defective
items are full.
Components
5/2 way double solenoid valve-Airtac-7V0520
5/3 way double solenoid valve-Airtac-7V0530PJ04
Diffuse sensor-Autonics-BF3RXP
Gripper-SMC-MHZ216D
Receiver-Autonics-BYD3MTDT1
Magnetic sensor (x axis cylinder)-SMC-DA90V
Drawing
Pneumatics
Electrical